Table of Contents
Advertisement
Configuring LAN Unit
1.
Click start - Control Panel.
2.
Click Network and Internet Connections; then, Network Connections. If Classic
view is selected, double-click Network Connections icon.
3.
Right-click Local Area Connection.
4.
From the pop-up menu, click Properties.
5.
In the Local Area Connection Properties dialog box, set the network setting
according to the instruction of your network administrator.
Make sure to log on your computer as a member of the Computer
administrators group. Otherwise, you cannot set or change some settings
for the LAN unit.
If you cannot access the network,
1.
Click start - Control Panel.
2.
Click Performance and Maintenance; then, System. If Classic view is selected,
double-click System icon.
3.
Click Hardware tab; then, Device Manager button.
4.
Double-click Network adapters, then, Realtek RTL8139/810x Family Fast
Ethernet NIC.
5.
Click Advanced tab, and select Link Speed/Duplex Mode in Property list and
select an appropriate value in Value pull-down menu.
6.
Click OK and close the Device Manager window.
7.
Click OK and close the Control Panel window.
5
5-3
Advertisement
Table of Contents
