S10 Blazer 1986-1994; S10 Pickup 1986-1993; S15 Jimmy 1986-1994; S15 Pickup 1986-1993 - Dynex DX-G1113 User Manual

Installing your car stereo
Chevrolet

S10 Pickup 1986-1993

S10 Blazer 1986-1994

GMC

S15 Pickup 1986-1993

S15 Jimmy 1986-1994

Oldsmobile

Bravada 1991-1994

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the ashtray and the one screw inside the ashtray compartment.
3 Open the glove box, then remove the two exposed screws on the edge of the dash trim
bezel.
4 Cut and remove all mounting tabs on bracket L S-10 and the right bracket of bracket
set 5 except the top B tab on the right bracket. Each mounting tab has a letter
stamped on the back of the tab. Cut the tabs with the blade pointed away from you
and your fingers.
5 Go to "Completing the installation" on page 76.
B
51