Camaro 1985-1992; Firebird 1985-1992 - Dynex DX-G1113 User Manual

30
Chevrolet

Camaro 1985-1992

Pontiac

Firebird 1985-1992

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the four star-drive screws from the dash trim bezel, then remove the bezel.
3 Remove the four screws that secure the factory head unit, then remove the head unit.
4 Cut and remove all mounting tabs on bracket 2 except the B tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to "Completing the installation" on page 76.
B
Installing your car stereo