Escalade 1999-2002; Chevrolet; Pickup 1995-2002; Silverado 1999-2002 - Dynex DX-G1113 User Manual

22
Cadillac

Escalade 1999-2002

Chevrolet

Pickup 1995-2002

Suburban 1995-2002

Tahoe 1995-2002

Silverado 1999-2002

GMC

Sierra 1995-2002

Suburban1995-2002

Yukon 1995-2002

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the steering column filler panel and the ashtray.
3 Unclip the dash trim bezel, then remove it.
4 Using a flat-blade screwdriver, press down on the outer clips of the factory head unit
(or pocket), then disconnect the wiring and remove the head unit.
5 Locate bracket set 8.
6 Go to "Completing the installation" on page 76.
Installing your car stereo