Riviera 1983-1985 - Dynex DX-G1113 User Manual

Installing your car stereo
Buick

Riviera 1983-1985

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Carefully pull to remove the dash trim bezel.
3 Remove the four screws that secure the factory head unit, then disconnect the wiring.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to "Completing the installation" on page 76.
2
S10 shown
as example
13