Installing The Software - Dynex DX-PHD35 User Manual

Setting up your hard drive enclosure

Installing the software

The installation CD includes backup software to enable you to back up
your files.
Note: This Roxio BackOnTrack software runs only on Windows 7,
Windows Vista, and Windows XP computers using USB.
Important: Before installing the backup software, make sure that your
Windows operating system has been updated to the latest service
pack. To make sure you have the latest service pack, run Windows
Update. No additional driver is required.
To install Roxio BackOnTrack:
1 Save all files and close all programs.
2 Insert the included CD into your optical drive. The introductory
screen opens.
Or, if the screen does not open, locate the CD in Windows Explorer
and double-click Run.exe on the CD. The initial menu opens.
3 Click Install Backup Software. The Welcome screen opens.
4 Click NEXT. The Roxio End-User License Agreement screen opens.
5 Read the license agreement, click "I accept..., "then click NEXT.
The Choose Setup Type screen opens.
6 Choose the setup type, then click Install to start installation. It
may take several minutes to install the software.
5
DX-PHD35