Introduction Congratulations on the purchase of your new Dynex DX-PHD25 external hard drive enclosure kit. This Dynex USB 2.0 2.5" PATA Hard Drive Enclosure lets you access your data at transfer speeds of 480Mbps, following the USB 2.0 standard. You can install a 2.5" PATA hard drive...
Additional USB 2.0 A type male connector for additional power (use if required) USB 2.0 A type male connector for data and bus power DX-PHD25 USB 2.0 Mini B type male connector for data and bus power...
DX-PHD25 The operating system automatically detects and sets up the new drive. If the drive is correctly detected, a new drive letter is assigned to the enclosure. • For PCs, the new drive letter appears in My Computer. • For Macintosh computers, the new drive letter appears on the desktop.
Page 5
Run.exe on the CD. The initial menu opens. 3 Click Install Backup Software. The Welcome screen opens. 4 Click NEXT. The Roxio End-User License Agreement screen opens. DX-PHD25 5 Read the license agreement, click “I accept..., “ then click NEXT. The Choose Setup Type screen opens.
8 Click FINISH to complete the installation. Using your enclosure Starting Roxio BackOnTrack To start Roxio BackOnTrack: 1 Press the backup button (the button with the Dynex logo on it) on the end of the enclosure. Or, click Start, Roxio, the BackOnTrack folder, then click BackOnTrack.
Page 7
To schedule your project, choose one of the options in Step 3 on the project window. For more information about scheduling a project, see "Using the Backup Files scheduler" on page 8. -OR- DX-PHD25...
DX-PHD25 To save your project, click Save. Enter a name for the project, then click OK. If you decided to run the project now, a progress screen will inform you when the project has been completed. 9 Click Done to return to the project window.
3 Click Roxio BackOnTrack, then click Change/Remove (Windows XP) or Uninstall (Windows Vista and Windows 7). 4 Follow the on-screen instructions to remove the software completely from your computer. 5 After the software is uninstalled, restart your computer if prompted. DX-PHD25...
DX-PHD25 Troubleshooting I do not see the additional drive in my system Windows users: Partition and format the new hard drive by using Disk Management in Windows. Macintosh users: Partition and format the new hard drive by clicking Disk Utilities in the Utilities folder, then clicking your external enclosure.
One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-PHD25 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).