Chapter 2 Installing The Chassis; Pre-Installation Checklist - Dell PowerConnect W-6000 Installation Manual

CAUTION: Installation should be performed by a trained technician.
This chapter covers the following installation topics:
Precautions to observe during installation

Requirements for W-6000 controller components and rack mounting gear

Selecting a proper environment for the W-6000 controller

Mounting the W-6000 controller in a rack

Connecting power to the W-6000 controller


Pre-Installation Checklist

You will need the following during installation:
Dell PowerConnect W-6000 Controller

Dell PowerConnect W-6000 Controller rack mounting hardware (included)

Phillips or cross-head screwdriver

19-inch equipment rack, or equivalent

3U rack space with 10 cm (4 inches) clearance to the left, right, front, and rear of the rack

Another person to help position the W-6000 controller.

One power cord for each power supply, rated to at least 10 A with IEC320 connector

Adequate power supplies and electrical power (see

Cool, non-condensing air 0 to 40 ºC (32 to 104 ºF): may require air conditioning

Console terminal with RJ-45 or DB-9 serial port

RS-232 serial cable with RJ-45 male connectors

A serial adapter (included) if connecting to the console with DB-9

Dell PowerConnect W-6000 Controller | Installation Guide
Chapter 2
Installing the Chassis
"Power Management" on page 25)
Installing the Chassis | 9