Cisco 3020 - Catalyst Blade Switch Release Note page 20

Release notes for cisco catalyst blade switch 3020 for hp, cisco ios release 12.2(50)se and later
Hide thumbs Also See for 3020 - Cisco Catalyst Blade Switch:
Table of Contents

Advertisement

Documentation Updates
Updates to the System Message Guide
New System Messages
Error Message ACLMGR-2-NOVMR: Cannot generate hardware representation of access list
[chars]
Error Message %DOT1X-5-FAIL: Authentication failed for client ([chars]) on Interface
[chars]
Error Message %DOT1X-5-SUCCESS: Authentication successful for client ([chars]) on
Interface [chars]
Error Message %DOT1X_SWITCH-4-PROC_START_ERR: Unable to start dot1x switch process.
Error Message %EC-5-MINLINKS_MET: Port-channel [chars] is up as its bundled ports
([dec]) meets min-links
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later
20
"New System Messages" section on page 20
"Deleted System Messages" section on page 22
There are insufficient resources available to create a hardware representation of the
Explanation
ACL. A lack of available logical operation units or specialized hardware resources can cause this
problem. Logical operation units are needed for a TCP flag match or a test other than eq (ne, gt, lt,
or range) on TCP, UDP, or SCTP port numbers.
Modify the ACL configuration to use fewer resources, or rename the ACL with
Recommended Action
a name or number that alphanumerically precedes the other ACL names or numbers.
Explanation
Authentication was unsuccessful. The first [chars] is the hostname, and the second
[chars] is the interface.
Recommended Action
No action is required.
Explanation
Authentication was successful. The first [chars] is the host name, and the second [chars]
is the interface.
No action is required.
Recommended Action
Explanation
The software could not start the 802.1x authentication process.
Use the reload privileged EXEC command to reload the switch.
Recommended Action
The administrative configuration of minimum links is equal to or less than the
Recommended Action
number of EtherChannel ports. The port channel is up. [chars] is the EtherChannel, and [dec] is the
EtherChannel group number.
No action is required.
Recommended Action
OL-18274-02

Advertisement

Table of Contents
loading

Table of Contents