Installation Instructions - HP AJ878A - StorageWorks 320 GB Hard Drive Release Note

SLES 11
Table 2 Qualified Windows Kernels
OS
Windows
Compatible Firmware Versions
CAUTION:
This list shows compatible versions, but the latest firmware is highly recommended for all HP
StorageWorks IO Accelerator types.
Release 1.2.4: firmware revision 17350 (filename: iodrive_17350.fff)
Release 1.2.7: firmware revision 36867 (filename: iodrive_36867_1.fff)
Release 1.2.7 Change Log
Updated HP StorageWorks IO Accelerator Manager (Windows), first release for Linux
Flashback (25th "parity" chip) improvements
New firmware: 3.0.0/36867
Support for SLES11
New fio-win-bugreport command line tool for Windows
fio-pci-check for Windows
fio-status and ioManager show when drive is approaching reduced write performance
Improved error handling during startup
Improved Linux kernel version matching during driver build
NOTE:
Fixed time-change sensitivity issue that could cause the watchdog timer to fire incorrectly and disable
a drive during operation. This could occur during a Daylight Savings Time change, or any other
forward time change on both Linux and Windows.

Installation instructions

For more information about the download location and installation instructions, please visit the following
links;
OS
Microsoft Windows Server 2003 x64 Editions R2
Microsoft Windows Server 2008 x64 - Server Edition
HP StorageWorks IO Accelerator Driver 1.2.7
Kernels
2.6.27.19_5_default
2.6.27.19_5_xen
2.6.27.21_0.1_default
Supported OS
5