HP AJ878A - StorageWorks 320 GB Hard Drive User Manual page 46

WARNING!
Interrupting an update while it is in progress can result in permanent damage to the device. Never
use the Windows Task Manager to stop the update. (For this same reason, ioManager disables
the Cancel button during the update process.) If the operation fails, it is critical that you restart
this operation and complete it successfully before a reboot occurs to prevent damage to the device.
1. The Windows Setup program places the included firmware in \Program Files\HP StorageWorks
IO Accelerator\Firmware . (You can also download the IO Accelerator firmware upgrade file
from http://www.hp.com/support
2.
Highlight the device(s) you want to upgrade.
3. If you have not done so, click Detach to detach the device from the operating system. The Device
Tree will show the link as detached:
4. Click Update Firmware in the Operations Pane.
5.
Select the IO Accelerator firmware file using the dialog. (The file naming convention is
iodrive_NNNNN.fff (where NNNNN is the version of the firmware).
6. Click Update Now:
46 ioManager for Windows
and place it in a convenient directory.)