Fujitsu MHN2100AT - Mobile 10 GB Hard Drive Product Manual page 5

This manual describes the MHN Series, 2.5-inch hard disk drives. These drives
have a built-in controller that is compatible with the ATA interface.
This manual describes the specifications and functions of the drives and explains
in detail how to incorporate the drives into user systems. This manual assumes
that the reader has a basic knowledge of hard disk drives and their implementations
in computer systems.
This manual consists of seven chapters and sections explaining the special
terminology and abbreviations used in this manual:
Overview of Manual
CHAPTER 1
This chapter gives an overview of the MHN Series and describes their features.
CHAPTER 2
This chapter describes the internal configurations of the MHN Series and the
configuration of the systems in which they operate.
CHAPTER 3
This chapter describes the external dimensions, installation conditions, and switch
settings of the MHN Series.
CHAPTER 4
This chapter describes the operation theory of the MHN Series.
CHAPTER 5
This chapter describes the interface specifications of the MHN Series.
CHAPTER 6
This chapter describes the operations of the MHN Series.
Terminology
This section explains the special terminology used in this manual.
Abbreviation
This section gives the meanings of the definitions used in this manual.
C141-E120-02EN
Preface
Device Overview
Device Configuration
Installation Conditions
Theory of Device Operation
Interface
Operations
i