Fujitsu MHN2100AT - Mobile 10 GB Hard Drive Product Manual page 111

Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 7-0:
Bit 8:
Bit 9:
*4 Word 51: PIO data transfer mode
Bit 15-8:
Bit 7-0:
*5 Word 53: Enable/disable setting of word 54-58 and 64-70
Bit 15-3:
Bit 2:
Bit 1:
Bit 0:
*6 Word 59: Transfer sector count currently set by READ/WRITE
MULTIPLE
Bit 15-9:
Bit 8:
Bit 7-0:
*7 Word 63: Multiword DMA transfer mode
Bit 15-8:
Bit 7-0:
*8 Word 64: Advance PIO transfer mode support status
Bit 15-8:
Bit 7-0:
C141-E120-02EN
Standby timer value. Factory default is '0.' ATA spec is '1.'
Reserved
1 = Supported
0 = Disable inhibition
Undefined
1 = LBA Supported
1 = DMA Supported
PIO data transfer mode
Undefined
Reserved
1 = Enable the word 88
1 = Enable the word 64-70
1 = Enable the word 54-58
command
Reserved
1 = Enable the multiple sector transfer
Transfer sector count currently set by READ/WRITE
MULTIPLE command without interrupt supports 2, 4, 8 and 16
sectors.
Currently used multiword DMA transfer mode
Supportable multiword DMA transfer mode
Bit 2: 1 = Mode 2
Bit 1: 1 = Mode 1
Bit 0: 1 = Mode 0
Reserved
Advance PIO transfer mode
5.3 Host Commands
X'02'=PIO mode 2
5-35