Advertisement
2. Remove the failed hard drive from the disk enclosure before
installing a new hard drive.
a. Press the ejector button, and pivot the lever to the full
open position.
b. Pull the drive from the disk enclosure.
3. Prepare the replacement drive for insertion into the disk
enclosure.
a. Press the ejector button of the hard drive.
b. Pivot the lever to the full open position.
4. Insert the replacement drive into the disk enclosure.
a. Slide the replacement drive into the disk enclosure.
b. Keep the ejector lever in the full open position while
installing the drive to ensure a correct latch.
5. When the drive has been fully inserted, close the ejector lever.
The locking hinge must be engaged behind the front panel of
the unit.
The installation is complete.
Advertisement
