Fujitsu MHG2102AT - Mobile 10 GB Hard Drive Product Manual page 109

Interface
Table 5.4 Information to be read by IDENTIFY DEVICE command (5 of 6)
Bit 2:
Bit 1:
Bit 0:
*10 WORD 82
Bit 15:
Bit 14:
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 9:
Bit 8:
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
*11 WORD 83
Bits 15-5: Undefined
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
5-36
ATA-2 supported = 1
ATA-1 supported = 1
Undefined
Undefined
'1' = Supports the NOP command.
'1' = Supports the READ BUFFER command.
'1' = Supports the WRITE BUFFER command.
Undefined
'1' = Supports the Host Protected Area feature set.
'1' = Supports the DEVICE RESET command.
'1' = Supports the SERVICE interrupt.
'1' = Supports the release interrupt.
'1' = Supports the read cache function.
'1' = Supports the write cache function.
'1' = Supports the PACKET command feature set.
'1' = Supports the power management feature set.
'1' = Supports the Removable Media feature set.
'1' = Supports the Security Mode feature set.
'1' = Supports the SMART feature set.
'1' = Supports the Removable Media Status Notification feature
set.
'1' = Supports the Advanced Power Management feature set.
'1' = Supports the CFA (Compact Flash Association) feature set.
'1' = Supports the READ/WRITE DMA QUEUED command.
'1' = Supports the DOWNLOAD MICROCODE command.
C141-E070-01EN