Rear Panel Components - D-Link DSN-1100-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

2.3

Rear Panel Components

The rear of the DSN-1100 storage system enclosure has the following components:
Data ports - four 1 GbE RJ-45 iSCSI data ports. Each iSCSI data port has port speed and

port activity LEDs (see Figure 2-4, Figure 2-5 and Table 2-5).
Management port (Mgmt 10/100) - one 10/100 RJ-45 management port is located to the

right of the four iSCSI data ports. The management port has port speed and port activity
LEDs (see Figure 2-4, Figure 2-5, and Table 2-6).
Diagnostic port (Diagnostic Port) - one 9600 bps RS-232-C DB9 diagnostic port is located

to the right of the management port. This requires a male-to-female straight-through
cable provided with the system.
Reset switch – this is hidden within a small hole. Please use the tip of a pen or a paper

clip to reset the system. Note: This reboots the system and does not reset the unit to
initial factory settings. (see Figure 2-4 and Table 2-4)
Power - a power receptacle is located at the bottom of the rear panel.

Security lock slot – Receptacle fits the most common security lock.

Four 1-Gigabit iSCSI
RJ-45 Ports
Reset Switch
(small hole)
16 Chapter 2 DSN-1100 Layout
Power Receptacle
Figure 2-4. Back View of the DSN-1100 Storage System
Management Port
Diagnostic Port
Security Lock Slot