ATTACH THE OPERATOR
Secure brackets to post and gate with c-clamps. Attach operator
arm to brackets with pins and clips provided (Figure 2).
Figure 2
C-Clamp
Disengage the operator by inserting the key and rotating the
handle (Figure 3).
Move the gate manually to the fully open and fully closed
positions. It is extremely important that the gate bracket does
not bind with the post bracket (Figure 4).
Figure 3
01-33464
Operator must be level
Pin
Actuator Side
Hairpin Clip
©2006, The Chamberlain Group, Inc.
All Rights Reserved
Gate
Bracket
C-Clamp
Figure 4