Page 1
For Your Records and Warranty Assistance Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ For reference also attach your receipt or a copy of your receipt to the manual. 42826-01 • 2/25/07...
7 • Operating and Cleaning • To reduce the risk of fire, electrical shock, or motor damage, do not Your Ceiling Fan..........13 use a solid-state speed control with this fan. Use only Hunter speed 8 • Troubleshooting ........... 14 controls.
Page 3
To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Low Profile Mounting fits close to the ceiling, recommended for ceilings less than 8 feet high 42826-01 •...
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Ceiling Plate Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Steps 2-4 – 2-6 Flat Washer 3” Wood Screw 42826-01 • 2/25/07 Hunter Fan Company...
3-8. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the Step 3-6 (Single) outlet box. Hunter Fan Company 42826-01 • 2/25/07...
4-3. Partially install each housing screw into the holes in the fan housing and into the ceiling plate until all holes are aligned. Securely tighten all screws. Housing Steps 4-1 – 4-3 Canopy Screw 42826-01 • 2/25/07 Hunter Fan Company...
5 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 5-1. Your fan may include blade grommets. If your fan has grommets, Step 5-1 (Detail) insert them by hand into the holes on the blades.
Page 9
6 • Completing Your Installation With or Without a Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
Otherwise, proceed with step 6-8. Plug 6-8. The last installation step when installing the light fixture is to Connector install the glass bowl. See “Installing the Glass Bowl” on page 11 for Detail instructions. Housing Assembly Screw Hunter Fan Company 42826-01 • 2/25/07...
Page 11
7. Thread the light pull chain through the finial and screw the Metal Rod finial onto the threaded rod end Light Bulbs until tight. (B10 Candelabra Metal Disk Base 60 Watt Maximum) Glass Bowl Cover Plate Breakaway Connector Finial 42826-01 • 2/25/07 Hunter Fan Company...
Page 12
7. Install the switch housing cap and plug button to the lower switch housing. Steps 3 – 5 Male Dummy Terminal Female Dummy Terminal Plug Button Step 7 Hunter Fan Company 42826-01 • 2/25/07...
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42826-01 • 2/25/07 Hunter Fan Company...
2. Tighten all blade and/or blade iron screws. If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 Hunter Fan Company 42826-01 • 2/25/07...