Nokia ck-10 - Hands-free Car Kit User Manual page 97

Settings
Press , and select
the application for the first time, you are asked to define
a name for your device. After you set Bluetooth
connectivity on and change
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth wireless
technology.
Select from the following:
Bluetooth—Select
another compatible device, first set Bluetooth
connectivity On, then establish a connection.
My phone's visibility—To allow your device to be found
by other devices with Bluetooth wireless technology,
select Shown to
Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
88
Tools > Bluetooth. When you open
My phone's visibility
On or Off. To connect wirelessly to
all. To hide it from other devices, select
Copyright © 2007 Nokia. All rights reserved.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
to
and the pairing initiated from the other device.
When pairing, use a 16-digit passcode, and set the other
device as authorized. See
remote SIM mode from the other device.
When remote SIM mode is on in your Nokia N73,
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select Exit rem. SIM
"Pair devices", p. 90. Activate the
mode.
Remote
in