Nokia ck-10 - Hands-free Car Kit User Manual page 70

Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)—Select the security option used to secure
the connection to the remote mailbox.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to you
by your service provider. Replies to your messages are sent
to this address.
Outgoing mail serv.—Enter the IP address or host name of
the mail server that sends your e-mail. You may only be
able to use the outgoing server of your network operator.
Contact your service provider for more information.
Access point in
See "Connection", p. 111.
The settings for
and Port
User settings
My name—Enter your own name. Your name replaces your
e-mail address in the recipient's device when the
recipient's device supports this function.
Send
device. Select
the mailbox when you select
During next
the remote mailbox is available.
Send copy to
copy of the e-mail to your remote mailbox and to the
address defined in
Include
signature to your e-mail messages.
New e-mail
the new e-mail indications, a tone and a note, when new
mail is received to the mailbox.
Copyright © 2007 Nokia. All rights reserved.
use—Select an Internet access point (IAP).
User name, Password,
are similar to the ones in
message—Define how e-mail is sent from your
Immediately for the device to connect to
Send
conn., e-mail is sent when the connection to
self—Select whether you want to save a
My e-mail address.
signature—Select whether you want to attach a
alerts—Select whether you want to receive
Security (ports),
Incoming e-mail.
message. If you select
61