3-D Tones - Nokia ck-10 - Hands-free Car Kit User Manual

When you choose a tone,
service) opens a list of bookmarks. You can select a
bookmark and start connection to a Web page to
download tones.
If you want the caller's name to be said when your device
rings, select Options
name to On. The caller's name must be saved in Contacts.
To create a new profile, select
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by
strength indicator area. All wireless RF signals to and from
the device are prevented. If you try to send messages, they
are placed in the outbox to be sent later.
Important: In the offline profile you cannot make
or receive any calls, or use other features that
require cellular network coverage. Calls may still
be possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
102
Tone downloads (network
> Personalise, and set Say caller's
Options > Create
in the signal
Copyright © 2007 Nokia. All rights reserved.
To leave the Offline
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength). If Bluetooth connectivity is activated before
entering the Offline
Bluetooth connectivity is automatically reactivated after
leaving the Offline
new.

3-D tones

Press , and select
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, scroll to the
ringing tone that is displayed, press
desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory
modify the effect, select from the following settings:
Trajectory speed—Select the speed at which sound moves
from one direction to another. This setting is not available
for all effects in
profile, press the power key, and select
profile, it will be deactivated.
profile. See "Settings", p. 88.
Tools > 3-D tones. With
3-D ringing tone
, and select the
and the desired effect. To
Sound trajectory.
3-D tones