Viewing Audio Cd Information; Opening The Dvd Main Menu; Selecting A Viewing Angle - Dynex DX-D7PDVD User Manual

7" and 9" Dual-Screen Portable DVD Players

Viewing audio CD information

To view audio CD information:
1
During playback, press FUNC. to enter the virtual remote control.
2
Move the cursor to DISP and press OK. The following display appears.
3
Press OK one or more times to view specific DVD information when the panel says "press OK to
display information."
You can view:
• Single Elapsed–Shows the currently playing track and the elapsed playing time for the
• Single Remain–Shows the currently playing track and the remaining playing time for the
• Total Elapsed–Shows the currently playing track and the elapsed playing time for the CD.
• Total Remain–Shows the currently playing track and the remaining playing time for the
• Display Off–Turns off the information display.

Opening the DVD main menu

To open the DVD menu:
1
During playback, press FUNC. to enter the virtual remote control.
2
Press MENU. If the DVD has a main menu, the menu opens.

Selecting a viewing angle

Some DVDs are recorded with multiple viewing angles for some scenes. When a scene has multiple
viewing angles, the angle icon
To select a viewing angle:
1
Press SETUP to enter the Setup menu, then set Angle Mark to ON. See "Using the Setup
menu" on page 17 for more information.
Single Elapsed
Track 1/24
track.
track.
CD.
Note
The information display automatically turns off if you do not
press OK within eight seconds.
Note
Contents of DVD main menus vary from DVD to DVD. Some DVDs
only let you start playback from the main menu.
appears on the screen.
00:00
13