Sony HVR-M15AU - Professional Video Cassete recorder/player Operating Instructions Manual page 19

l Search indicator
Displays the search mode when you search for scenes
using the Remote Commander.
For details on the search function, see "Searching using the
search function" on page 34.
m Audio mode indicator
In the recording mode, displays
[FS32K] for [AUDIO MODE] in the [AUDIO SET]
menu.
When you select [FS48K],
During playback, displays the audio mode recorded on
the tape. During i.LINK input, displays the audio mode
of the signal input to the HDV/DV jack.
Notes
• The audio mode will not be displayed when [HDV/DV
SEL] in the [IN/OUT REC] menu is set to [HDV].
• Signals other than HDV/DVCAM lock mode will
become non-standard audio and
displayed during playback or when the signal is input
from the HDV/DV jack.
n Audio level meters
For details of the audio level meter display, see [AUDIO
MIX] in the [AUDIO SET] menu (page 54).
Note
If the audio level meter turns red in EE or recording
mode, the sound will be distorted because the input level
is too high. (However, when the audio mode is set to
32 kHz (4-channel, 12 bits) and [AUDIO MIX] (page
54) is set to [MIX], the audio level meter does not turn
red regardless of the input level.) During playback or
while HDV/DV signals are input, the level meter does
not turn red.
o Date/time indicator
When you press the DATA CODE button of the Remote
Commander or set [DATA CODE] in the [DISPLAY
SET] menu to [DATE], you can display the recording
date/time.
For details on the date/time indicator, see "Displaying
information (data codes) recorded on a tape" on page 32.
when you select
is displayed.
/ is
19
Chapter 1 Overview