Metering; Continuous Shot - Samsung NV3S User Manual

Metering

■ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- Multi : Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
- Spot : Only the rectangular area in the centre of
the LCD monitor will be metered for light.
This is the preferable setting when you want the subject in the centre of
the image exposed correctly, regardless of the back lighting.
INFORMATION
● If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, It is
better to use exposure compensation.

Continuous shot

■ You can select continuous shot, and AEB (Auto Exposure Bracketing).
- Single
- Continuous
METERING
Multi
Spot
- AEB
※ High resolution and picture quality increases file saving time, which increases
stand-by time.
※ If the [Continuous] or [AEB] sub menu is selected, the flash will be off
automatically.
※ If less than 3 pictures are available in the memory, the AEB shooting is not
available.
※ It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
: Take one picture only
: Images will be taken continuously
until the shutter button is released.
The shooting capacity depends on
the memory.
: Take three pictures in a series in
different exposures: standard
exposure(0.0EV), short exposure
(-0.5EV) and over exposure (+0.5EV). Use the mode if it is hard
to decide exposure of the object.
SHOOTING
Single
Continuous
AEB AEB
[ PROGRAM mode ]
《37》