Syncro Slave - Focus DR-HD100 - Firestore - Data Storage Wallet User Manual

Quickstart

Syncro Slave

This mode is for camcorders that do not have external control or
the tapeless control functionality compatible with the DR-
HD100.
• Syncro Slave mode requires that a tape be in the camcorder
for operation.
• The DR-HD100 must be set to
• In this mode, the DR-HD100 watches the record state of the
camcorder and follows its actions.
When Synchro Slave mode is entered from the menu, the Home
screen appears with the Pause indicator displayed in the upper
left-hand corner along with a
is following the camcorder's record state.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
34
CONTROL
LOCAL
JVC GY-HD

-SYNCRO SLAVE

AV / C
Verify that the DR-HD100 is in
From the DR-HD100 Home screen, press the
navigation button several times until the
appears:
Use the navigation button to select
Down
The dash on the left side of an item indicates it is the current
selection. The default value is
Press the navigation button.
Select
The beginning screen returns and a
appears in the upper left-hand corner. Next to this symbol,
is a indicating that DR-HD100 is now following the
Y
record state of the connected camcorder.
Now the DR-HD100 will record at the same time the
camcorder records to tape.
ProHD DR-HD100 Portable DTE Recorder

Syncro Slave

that indicates that the DR-HD100
Y
STOP
Local
Pause
control mode.
mode.
Right
screen
CONTROL
Syncro Slave
.
indicator
.