Powering The Dr-Hd100; Connecting The Dr-Hd100 To Ac Power - Focus DR-HD100 - Firestore - Data Storage Wallet User Manual

Quickstart

Powering the DR-HD100

• The DR-HD100 operation without a battery installed.
To operate the DR-HD100 without a battery installed,
connect the unit to an AC power source.
• Before operating the DR-HD100 with battery power.
It is first necessary to fully charge the battery. An uncharged
battery, typically takes 2-3 hours to charge.

Connecting the DR-HD100 to AC Power

Attach the AC power cord to the DR-HD100 (with or without battery
installed). The DR-HD100 is immediately ready for operation.
To do this, connect the AC power as follows:
Battery Pack
Step 1:
Plug the cord from the power supply into the bottom of the
DR-HD100.
Step 2:
Connect the line cord to the rectangular power supply.
Step 3:
Plug the line cord into an electric outlet.
20
DC Power Port
ProHD DR-HD100 Portable DTE Recorder
DC Cable