Tv Standard; Default; Memory Status - DXG Digital Camera User Manual

3.4.7

TV Standard

Use the TV option to set up the applicable local TV system.
1. Turn the camera on, and use joystick (Left/Right button ) to System icon, and then press
OK to enter Setup mode.
2. Use joystick (Up/Down button
below.
3. Use the joystick (Left/Right button
confirm.
4. Press the joystick (ENTER button
3.4.8

Default

Use this option to reset all settings to the factory default.
1. Turn the camera on, and use joystick (Left/Right button ) to System icon, and then press
OK to enter Setup mode.
2. Use the joystick (Up/Down button
appears as below. Press the OK
.
or
3. Press the OK to confirm.
4. Press the joystick (ENTER button
3.4.9

Memory Status

1. Turn the camera on, and use joystick (Left/Right button ) to System icon, and then press
OK to enter Setup mode.
2. Use joystick (Up/Down button ) to select the Memory Status option. The screen appears
as follow. Press OK to enter to display the current storage status.
) to select the TV Standard option. The screen appears as
) to select NTSC/PAL, and press the OK
) or Mode button to leave the menu.
) to select the Default 選option, and the screen
to use the joystick (Left/Right button
) or mode button to leave the menu.
to
) to select
35