IBM x3350 - System - 4192 Installation Manual page 24

3. If you are planning to install or remove a memory module, PCI adapter, battery,
4. Press down on the left and right side latches and pull the server out of the rack
5. Loosen the thumbscrew at the back of the server.
6. Slide the two cover-release latches on the fan door on the right side of the top
10
IBM System x3350 Types 4192 and 4193: Installation Guide
Pull the cover straight back and off the power supplies; then, remove it and
store it in a safe place.
or other non-hot-swap optional device, turn off the server and all attached
devices and disconnect all external cables and power cords (see "Turning off
the server" on page 24).
enclosure until both slide rails lock.
Note: You can reach the cables on the back of the server when the server is in
the locked position.
of the server back; then, open the fan door cover.
Thumbscrew
Fan door