Probe Ii - Asus CG8890 User Manual

Adjust System Level Up via two methods:
BIOS
In the BIOS Setup program, click Extreme Tweaker > System Level Up, and configure
the options as needed.
OC Button
Press the OC button on the upper left side corner of the front panel of your desktop.

Probe II

Probe II is a utility that monitors the computer's vital components, and detects and alerts you
of any problems. Probe II monitors fan rotations, CPU temperature, and system voltages,
among others. With this utility, you are assured that your computer is always at a healthy
operating condition.
Launching Probe II
After installing AI Suite II from the motherboard support DVD, launch Probe II by clicking
Tool > Probe II on the AI Suite II main menu bar.
Configuring Probe II
Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to adjust the
sensor threshold values. The Preference tab allows you to customize the time interval of
sensor alerts, or change the temperature unit.
Loads your saved
Saves your
configuration
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS CG8890
Loads the default
configuration threshold values
for each sensor
Applies changes
5