Repeat Play; Random Play); Selecting Groups; Search Function - Alpine IVE-W535HD Owner's Manual

Repeat Play

Available for AVRCP Ver. 1.3 and 1.4 only.
Touch [ ] during playback.
The repeat mode switches every time the button is touched.
(FILE)
(GROUP)
(ALL)
(OFF)
• Operations may differ depending on the connected BLUETOOTH
compatible device.
M.I.X. (Random Play)
Available for AVRCP Ver. 1.3 and 1.4 only.
Touch [ ] during playback.
The M.I.X. mode switches every time [
(GROUP)
(ALL)
(OFF)
• Operations may differ depending on the connected BLUETOOTH
compatible device.

Selecting Groups

Available for AVRCP Ver. 1.3 and 1.4 only.
Touch [ Group] or [Group

Search Function

Available for AVRCP Ver. 1.4 only.
The displayed list differs with the connected BLUETOOTH device.
Touch [ (Search)] of Bottom banner during
playback.
Select the track, etc., you want to listen to from the displayed list.
64
-EN
] is touched.
] to select the group.
Auxiliary Device
(Optional)

Operating Auxiliary Devices (Optional)

To operate devices connected to the AUX terminals of IVE-W535HD,
follow the procedure described below.
• Set AUX In to "On." Refer to "Setting the AUX Mode" (page 52).
• Depending on the connected unit, the onscreen buttons may not
work, or their operation may differ.
WARNING
It is dangerous (and illegal in many states) for the
driver to watch TV/video while driving the vehicle. The
driver may be distracted from looking ahead and an
accident could occur.
Install the IVE-W535HD correctly so that the driver
cannot watch TV/video unless the vehicle is stopped
and the emergency brake is applied.
If the IVE-W535HD is not installed correctly, the driver
will be able to watch TV/video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
1
Press the (SOURCE) button.
2
1
Touch [AUX1]* , [AUX2]*
banner.
The AUX mode screen is displayed.
1
* The name which is given as the mode name in "Setting the Primary
AUX Name (AUX Setup)" (page 52) and "Setting the Secondary AUX
Name" (page 52) is displayed.
2
* When "Setting the AUX3" (page 52), AUX3 appears when setting
"AUX" only.
1 2
or [AUX3]* of Top