Tascam HS-4000 New Features Manual page 3

X
Rehearsal playback when PREVIEW ON
i Playback is only possible between the Start and End points.
Moving outside these points is not possible.
, and
i
Fade In Fade Out Level Adjust
signal.
N OT E
In order to prevent the rehearsal playback sound from being sent to the broad-
cast main line from the main outputs (rear panel LINE XLR outputs), the follow-
ing operations are restricted.
i If the online function is set to Switchable and the online playback mode is ON,
the Adjust screen cannot be opened. (When in dual mode, this restriction applies
when the online playback mode of the corresponding player is ON.)
i When the Adjust screen is open, you cannot turn the online playback mode ON.
(This restriction applies only to the player being adjusted when in dual mode.)
Changing assignments on the ENTRY list screen
Touch an entry name button on the
which can be used to change assignments, on the right side.
Change the BC$STANDBY/END range in one operation
A new function allows you to change the BC$STANDBY–BC$END mark
range in one operation.
1. In playlist mode, open the pull-up menu on the file
or screen.
ENTRY
2. Touch the
CAPTURE BC$
pull-up menu, to open the following pop-up window message.
settings affect the playback
screen to open the take list,
ENTRY
ASSIGN
button, which has been added to the
NOT E
Touch the CANCEL button in the pop-up window to return to the file ASSIGN
screen or ENTRY list screen.
3. Touch the
CAPTURE ALL
ing pop-up window message.
4. In the confirmation pop-up window, touch the
ton to change the BC$STANDBY–BC$END mark range.
NOT E
Touch the CANCEL button in the pop-up window to return to the file ASSIGN
screen or ENTRY list screen.
5. In the pop-up window that appears after step 1, if you touch the
RESET ALL
pears.
screen
6. Touch the
entry's starting and ending times to the beginning and end of the
file.
NOT E
Touch the CANCEL button in the pop-up window to return to the file ASSIGN
screen or ENTRY list screen.
HS-4000
button pop-up window to open the follow-
button, the following pop-up window message ap-
button in the pop-up window to reset the
RESET ALL
but-
CAPTURE ALL
3
TASCAM HS-4000