Tascam HS-4000 New Features Manual page 2

X
Playlist mode changes to ADJUST screen operations
and addition of rehearsal playback function for audio
monitoring
When editing playlist mode entries, the contents and operation of the screen
opened by the button have been changed.
ADJUST
0 Additional items shown
The following items have been added to the playback area display.
i Standard level line (0 dB)
i Adjusted level line
i Various mark icons
Use the . and / buttons to change the entry being adjusted.
0 Editing the playback beginning and ending points
1. Press the HOME key on the front panel to open the Home Screen.
2. Touch a file name or title name button and then touch the
button in the pull-down menu to open the
ADJUST ENTRY
screen. ("
ADJUST XXX XXX
N OT E
You can also open this by touching the MENU button and then touching the
ADJUST button in the pull-up menu when a take is selected on the ENTRY screen
or one of the key assign buttons on the left is selected on the ASSIGN screen.
3. Touch the
Start End Point
4. Touch a time display unit to highlight it yellow. The corresponding
cursor will blink.
When a time field is selected, you can use the dial to adjust the
Start/End position.
If the selected field is increased/decreased past its maximum/
minimum, the next higher/lower field will also be increased/de-
creased by 1.
5. Select the frame field to edit at frame precision, and select the
sample field to edit at sample precision.
Touch the button to capture the current playback posi-
CURRENT
tion as the Start/End position.
Touch the button to switch between the number button and
EDIT
mark list screens.
6. Touch the , button to open a confirmation pop-up window
BC$
to decide whether or not the BC$STANDBY and END mark times
are loaded as the start and end points. Touch the OK button in the
pop-up window to load the BC$STANDBY and END mark times as
the Start and End points.
Touch the button in the pop-up window to reset the start
RESET
and end points to the beginning and end of the file.
N OT E
When changing the playback start and end time, settings will automatically be
restricted so that the total length between the start and end is longer than the
total fade-in and fade-out length. If the length between BC$STANDBY and END is
shorter than the total fade-in and fade-out time, the fade-in and fade-out times
will be cleared.
0 Editing the playback starting time
1. Press the HOME key on the front panel to open the Home Screen.
2. Touch a file name or title name display and then touch the
button in the pull-down menu to open the
ADJUST ENTRY
screen. ("
ADJUST XXX XXX
2
TASCAM HS-4000
" is the entry number.)
tab to open that page (if not open).
" is the entry number.)
NOT E
You can also open this by touching the MENU button and then touching the
ADJUST button in the pull-up menu when a take is selected on the ENTRY screen
or one of the key assign buttons on the left is selected on the ASSIGN screen.
3. Touch the
Start TC Fade/Level
screen.
4. Touch the button to open the
EDIT
the number buttons to adjust the Start TC.
0 Editing the fade-in/fade-out lengths and levels
1. Press the HOME key on the front panel to open the Home Screen.
2. Touch a file name or title name button and then touch the
but ton in the pull- down menu to open the
ADJUST ENTRY
screen. ("
ADJUST XXX XXX
3. Touch the
Start TC Fade/Level
above.
4. After selecting the
Fade In
DATA dial to change the setting.
Setting values:
i Fade In/Out Length: 0-30 seconds (0.1 seconds/step when turning; 1.0
seconds/step when pressing and turning)
i Level range: – ∞ to +10 dB
NOT E
When changing the fade-in and fade-out lengths, their settings will automati-
cally be restricted so they are less than the total length between the playback
start and end.
0 Rehearsal playback operation
Using the transport on this screen allows rehearsal playback.
The . and / keys function the same as regular transport controls
except they can be used to move between the file beginning, Start point,
End point and file ending.
Use the button to change the rehearsal playback contents.
PREVIEW
i If you change the point or
Start
will become the current playback position. If you make a change dur-
ing playback, playback will continue after moving to the new play-
back position.
i If you change the Point or
End
position will change as follows. If you make a change during playback,
playback will continue after moving to the new playback position.
PREVIEW OFF
When changing End 2 seconds before End
Point Point
2 seconds before
When changing Fade
Fade Out start posi-
Out length
tion
Rehearsal playback when PREVIEW OFF
i The recording is played back without being changed by the
and
Fade Out Level Adjust
i You can move to parts of the file outside the Start/End Point range.
i When you reach the End Point during playback, playback will stop
and the Start Point will become the playback position.
Press the PLAY key to start playback from the Start Point.
Use the , , / and SHIFT+ / keys or the JOG/SHUTTLE dial
to move past the End Point.
HS-4000
tab to open the following
screen, and use
EDIT START TC
" is the entry number.)
tab to open the screen shown
, or knob, turn the
Fade Out Level
length, the
Fade In Start
Length, the current playback
Fade Out
PREVIEW ON
2 seconds before
Fade Out start posi-
tion
2 seconds before
Fade Out start posi-
tion
Fade In
settings.
point
,