Panasonic Lumix DMC-SZ7 Owner's Manual page 45

q [Economy]
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
•
[Sleep Mode] is set to [5MIN.] in the Intelligent Auto Mode.
•
Press any button to turn on the LCD monitor again.
•
[Sleep Mode] does not work in the following cases.
– When connecting to the AC adaptor (supplied)
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[Auto Demo]
• The effect of the [LCD Power Save] is lower in the Digital Zoom range compared to the Optical
Zoom range.
• The effect of the [LCD Power Save] will not affect the image being recorded.
•
Setting of [LCD Mode] has priority over the setting of [LCD Power Save] regarding the
brightness of the LCD monitor.
o [Auto Review]
•
[Auto Review] is activated regardless of its setting in the following cases.
–
When using Auto Bracket.
–
When using [Burst].
•
In Intelligent Auto Mode or [Panorama Shot] and [Photo Frame] in Scene Mode, the Auto
Review function is fixed to [2SEC].
•
[Auto Review] does not work when recording motion pictures.
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
p [Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[2MIN.]/[5MIN.]/[10MIN.]/[OFF]
[LCD Power Save]:
ECO
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢ Excluding the Digital Zoom range.
[ON]/[OFF]
Set the length of time that the picture is displayed after taking the
still picture.
[1SEC]
[2SEC]
[HOLD]:
The pictures are displayed until one of the buttons is pressed.
[OFF]
- 45 -
Basic
¢
.