Panasonic Lumix DMC-GF5 Owner's Manual page 157

[MF Assist]
•
Refer to P96 for details.
[MF Guide]
•
Refer to P96 for details.
[Power Zoom Lens]
Recording
[ON]/[OFF]
[ON]/[OFF]
This may only be selected when using a lens that is compatible
with power zoom (electrically operated zoom).
–
The interchangeable lens (H-PS14042) is compatible with power
zoom.
–
The interchangeable lenses (H-FS014042, H-H014) are not
compatible with power zoom.
(For compatible lenses, please refer to our website)
[Disp Focal Length]:
When you zoom, the focal distance is
displayed and you can confirm the
zoom position.
A Current focal distance
[ON]/[OFF]
[Step Zoom]:
When you operate the zoom with this
setting [ON], the zoom will stop at
positions corresponding to
predetermined distances.
•
[Step Zoom] is disabled during motion
picture recording.
[ON]/[OFF]
[Zoom Resume]:
When you switch the power switch [ON], the zoom positions when
you last switched [OFF] are automatically restored.
[ON]/[OFF]
[Zoom Speed]:
You can set the zoom speed for zoom lever operations.
•
If you set [Step Zoom] to [ON], the zoom speed will not change.
[Photo]:
[H] (High speed), [M] (Middle speed), [L] (Low speed)
[Video]:
[H] (High speed), [M] (Middle speed), [L] (Low speed)
[Zoom Ring]:
This may only be selected when a power zoom-compatible lens
with a zoom lever and zoom ring is attached. When set to [OFF],
the operations controlled by the zoom ring are disabled to prevent
accidental operation.
[ON]/[OFF]
- 157 -
[e.g.: When the
interchangeable lens
(H-PS14042) is used]
[e.g.: When the
interchangeable lens
(H-PS14042) is used]
A