Easily set aperture/shutter speed for suitable exposure (One Push AE)
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when the
shutter button is pressed halfway.
•
If the Manual Exposure Assistance is anything other than
when in
mode. For more details on Manual Exposure
Assistance, refer to P110.
1
Set the [Fn Button Set] of the [Custom] menu to [One Push AE].
•
This is the procedure for setting [Fn1].
2
(When exposure is not adequate) Press [Q.MENU/Fn1].
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
Recording
Mode
•
In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
–
When the subject is extremely dark and it is not possible to achieve adequate
exposure by changing the aperture value or shutter speed
–
When recording using the flash
–
In Preview Mode
–
When using a lens that includes an aperture ring
Note
•
mode, you can cancel program shift B by pressing
In
function button.
Recording
Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
(P106)
- 107 -
3
3
0
0
3
3
A
B