To Select In The Change Root Folder Dialog; Folder And Media Operations; Clip Folders For Mp4 File Format; Creating Folders - JVC GY-HM700U - Prohd Compact Shoulder Solid State Camcorder User Manual

To select in the Change Root Folder
Dialog
1
Select [Change Root Folder] from the [View]
menu, or click the Change Root Folder button
2
In the Tree View pane of the dialog, select a
media item or folder
3
Click [OK]
● The Change Root Folder dialog closes, and the contents
of the selected media or folder appear in the List View
pane.
Note ：
● When you select a media item, a message may appear
saying that The work folder or media needs to be
repaired. , and that Restore on the recording device .
This message appears when the data is defective,
typically because the recording device was powered off
during recording, or because the media was ejected too
soon. If this message appears, you should reinsert the
media into the recording device and attempt to salvage it
as soon as possible. The data may become
unrecoverable if you continue to work with it without
salvaging it.
Folder and Media
Operations
Note ：
● Always observe the following precautions during
processing of folder and media operations.
● Do not power off the computer or media drive before
the operation completes.
● Do not eject the media before the operation completes.

Clip Folders for MP4 File Format

The clips are stored together with a BPAV folder
(A Page 42). (This folder does not appear in the Info
windows, but it can be seen in Finder.)
Whenever you copy or move clips with this application, copy
or move the BPAV folder along with the clips. You cannot
work with clips separately from the BPAV folder.
Note ：
● Simultaneous access to files may not be possible when
you attempt to access the same folder at the same time
from several computers over a network connection.

Creating Folders

1
Referring to Selecting Work Media and Work
Folders (A Page 30), select the media or open the
folder where you want to create the folder, making
it the root folder of the Tree View pane
2
With the root folder having the focus, select
[Create New Folder] from the [File] menu, or click
the [Create New Folder] button
● A new folder is created on the selected media or in the
selected folder in step
Reasons why folder creation may fail
Folder creation operations may fail for the following reasons.
In these cases, an error message appears and the folder is
not created.
● You do not have write privileges for the media or folder
1
selected in step .
● The media or folder selected in step
1
.
1
is write protected.