Panasonic Lumix DMC-FZ200 Owner's Manual page 219

The lens clicks.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and the
picture on the screen may drastically change. However, the picture is not affected. The sound is
caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please re-set the clock.
Zooming stops instantaneously.
•
When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
(DMC-FZ60)
Zoom does not go up to maximum magnification.
•
Is the camera set to Macro Zoom Mode?
Maximum zoom during Macro Zoom Mode is 3k Digital Zoom.
The file numbers are not recorded consecutively.
•
When you perform an operation after taking a certain action, the pictures may be recorded in folders
with different numbers from the ones used prior to the operation.
The file numbers are recorded with previously used numbers.
•
If you insert or remove the battery before turning off this unit, the folder and file numbers for the
pictures taken will not be stored in the memory. When this unit is turned on again and pictures are
taken, they may be stored under file numbers which should have been assigned to previous
pictures.
When the camera is left alone, the slide show is suddenly displayed.
•
This is the [Auto Demo] to introduce the features of the camera. Press a button to return the camera
to the original screen.
Others
(P97)
- 219 -
(P27)