Panasonic Lumix DMC-FZ200 Owner's Manual page 189

Note
•
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the printer are connected, the status indicator blinks and
the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the
USB connection cable.
•
Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed.
(may not be displayed depending on the type of printer used)
•
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•
Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.
•
Motion pictures recorded cannot be printed out.
Connecting to other equipment
- 189 -