Panasonic Lumix DMC-FZ200 Owner's Manual page 195

Note
•
Lens adaptor (optional) is needed to use the conversion lens.
(DMC-FZ200) :
DMW-LA7
(DMC-FZ60) :
DMW-LA5
•
MC protector (DMW-LMC52: optional) or ND filters (DMW-LND52: optional) cannot be used together
with the conversion lens. Remove them before attaching the conversion lens.
•
Do not use with anything other than DMW-LC55 or DMW-LT55.
•
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may be
affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures.
•
When using the tele conversion lens:
–
We recommend using a tripod.
–
The Stabilizer function may not work sufficiently.
–
The focus indication may light due to the jitter even if the subject is not focused.
–
The time required for focusing may become longer than usual.
Protector/Filter (optional)
The MC protector (DMW-LMC52: optional) is a transparent filter which affects neither the colors
nor the amount of light, so it can always be used to protect the camera's lens.
The ND filter (DMW-LND52: optional) reduces the amount of light to approximately 1/8th (equal
to adjusting the aperture value 3 increments) without affecting the color balance.
PL filter (DMW-LPL52: optional) will suppress the reflected light from a metal or non spherical
surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air), making it
possible to take a picture with enhanced contrast.
Note
• Do not attach multiple filters at the same time.
•
If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
•
If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the camera.
•
Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus may
be adjusted to the lens, resulting in the subject being out of focus.
•
Refer to the operating instructions for each filter for details.
Others
- 195 -