Image Menu - Dukane ImagePro 8915 8915 8915 User Manual

IMAGE Menu

With the IMAGE menu, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
H PHASE
Using the buttons ▲/▼ switches the mode for aspect ratio.
At a RGB/DVI signal
4:3  16:9  NORMAL
At a video signal / no signal
4:3  16:9  SMALL
• The NORMAL mode keeps the original aspect ratio of the signal.
• At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT
VIDEO input, this item can't be selected.
• Performing the automatic adjustment initializes the aspect ratio
setting.
Using the buttons ▲/▼ adjusts the over-scan ratio.
Large (It reduces picture)  Small (It magnifies picture)
• This item can be selected only at a video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the buttons ▲/▼ adjusts the vertical position.
Up  Down
This item is not selected when DVI-D input port is selected.
Using the buttons ▲/▼ adjusts the horizontal position.
Left  Right
This item is not selected when DVI-D input port is selected.
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
flicker.
Right  Left
• This item can be selected only at a RGB signal or a component
video signal. Note that this does not work with the input signal of
525i(480i)/625i(576i) from the component video port.
Multifunctional settings
MENU [RGB]
PICTURE
IMAGE
VIDEO Qlty.
INPUT
SETUP
SCREEN
OPTION
NETWORK
EASY MENU
Description
:SELECT
ASPECT 4:3
OVER SCAN 95
V POSITION 25
H POSITION 142
H PHASE 16
H SIZE 1344
AUTO ADJUST EXECUTE
29