Download
Share
Print this page
Dukane ImagePro 8914 Communications Manual
  1. Manuals
  2. Brands
  3. Dukane Manuals
  4. Projector
  5. ImagePro 8914
  6. Communications manual
Dukane ImagePro 8914 Communications Manual

Dukane ImagePro 8914 Communications Manual

Rs-232c communication
Hide thumbs Also See for ImagePro 8914:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual See also: User Manual
RS-232C Communication
RS-232C Communication
1
2
3 3
4 4
5
6 6
7 7 7
8 8
9 9 9
CONTROL port
of the projector
Connecting the cable
Turn off the projector and the computer.
1.
Connect the CONTROL port of the projector with a RS-232C port of
2.
the computer by a RS-232C cable (cross). Use the cable that fulfills the
specifi cation shown in the previous page.
Turn the computer on, and after the computer has started up turn the
3.
projector on.

Communications setting

19200bps, 8N1
1. Protocol
Consist of header (7 bytes) + command data (6 bytes).
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC fl ag for command data
CRC_high : Upper byte of CRC fl ag for command data
3. Command data
Command data chart
byte_0
byte_1
Action
low
high
Action (byte_0 - 1)
Action
Classifi cation
1
SET
2
GET
4
INCREMENT
5
DECREMENT
6
EXECUTE
6
8914
RS-232C cable (Cross)
- (1)
RD (2)
RD (2)
RD (2)
RD (2)
TD (3)
TD (3)
TD (3)
- (4)
GND (5)
GND (5)
- (6)
RTS (7)
RTS (7)
RTS (7)
RTS (7)
CTS (8)
CTS (8)
CTS (8)
- (9)
byte_2
byte_3
Type
low
high
Change setting to desired value.
Read projector internal setup value.
Increment setup value by 1.
Decrement setup value by 1.
Run a command.
(1) CD
(2) RD
(2) RD
(2) RD
(2) RD
(3) TD
(3) TD
(3) TD
(4) DTR
(5) GND
(5) GND
(6) DSR
(7) RTS
(7) RTS
(7) RTS
(7) RTS
(8) DTS
(8) DTS
(8) DTS
(9) RI
byte_4
byte_5
Setting code
low
high
Content
1
2
3
4 4
5
6 6
7 7 7
8 8
9 9 9
RS-232C port
of the computer

Advertisement

loading

Related Manuals for Dukane ImagePro 8914

Summary of Contents for Dukane ImagePro 8914

  • Page 1: Communications Setting

    Connecting the cable Turn off the projector and the computer. Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable (cross). Use the cable that fulfills the specifi cation shown in the previous page.
  • Page 2 • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.
  • Page 3 RS-232C Communication (continued) Names Operation Type Power Turn off Turn on Input Source RGB IN 1 RGB IN 2 VIDEO S-VIDEO COMPONENT Error Status BRIGHTNESS Increment Decrement BRIGHTNESS Reset Execute CONTRAST Increment Decrement CONTRAST Reset Execute MODE NORMAL CINEMA DYNAMIC GAMMA #1 DEFAULT #1 CUSTOM...

  • Page 4: Color Temp

    Names Operation Type User Gamma Pattern 9 step gray scale 15 steps gray scale Ramp User Gamma Point 1 Increment Decrement User Gamma Point 2 Increment Decrement User Gamma Point 3 Increment Decrement User Gamma Point 4 Increment Decrement User Gamma Point 5 Increment Decrement User Gamma Point 6...
  • Page 5 RS-232C Communication (continued) Names Operation Type COLOR TEMP GAIN G Increment Decrement COLOR TEMP GAIN B Increment Decrement COLOR TEMP OFFSET R Increment Decrement COLOR TEMP OFFSET G Increment Decrement COLOR TEMP OFFSET B Increment Decrement COLOR Increment Decrement COLOR Reset Execute TINT Increment...
  • Page 6 Names Operation Type ASPECT 16:9 SMALL NORMAL OVER SCAN Increment Decrement OVER SCAN Reset Execute V POSITION Increment Decrement V POSITION Reset Execute H POSITION Increment Decrement H POSITION Reset Execute H PHASE Increment Decrement H SIZE Increment Decrement H SIZE Reset Execute AUTO ADJUST Execute...
  • Page 7 RS-232C Communication (continued) Names Operation Type KEYSTONE V Increment Decrement KEYSTONE V Reset Execute WHISPER NORMAL WHISPER MIRROR NORMAL H:INVERT V:INVERT H&V:INVERT VOLUME Increment Decrement AUDIO - RGB1 TURN OFF Audio1 Audio2 AUDIO - RGB2 TURN OFF Audio1 Audio2 AUDIO - Video TURN OFF Audio1 Audio2...

  • Page 8: Menu Position

    RS-232C Communication (continued) Names Operation Type MUTE TURN OFF TURN ON LANGUAGE ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO NORSK NEDERLANDS PORTUGUÊS SVENSKA PУCCKИЙ SUOMI POLSKI TÜRKÇE MENU POSITION H Increment Decrement MENU POSITION H Execute Reset MENU POSITION V Increment Decrement MENU POSITION V Execute Reset...
  • Page 9 Names Operation Type OSD BRIGHT. Increment Decrement BLANK My Screen ORIGINAL BLUE WHITE BLACK BLANK On/Off TURN OFF TURN ON START UP My Screen ORIGINAL TURN OFF My Screen LOCK TURN OFF TURN ON Message TURN OFF TURN ON AUTO SEARCH TURN OFF TURN ON AUTO POWER OFF...