Accessories; Standard Accessories; Optional Accessories - Hitachi DV20VB2 - 1/2 Inch Hammer Drill Instruction Manual

English
WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Plastic Carrying Case (Code No. 323049) ......................................................................... 1
(2) Side Handle (Code No. 323050) ......................................................................................... 1
(3) Depth Gauge (Code No. 303709) ....................................................................................... 1
(4) Chuck Wrench (Code No. 987576) ..................................................................................... 1
OPTIONAL ACCESSORIES ............... sold separately
(1) Drill bit for concrete and stone
Bit Dia. Overall
Length
1/8" 2-9/16"
(3.2mm) (65mm)
3/16" 3-3/8''
(4.8mm) (85mm)
7/32" 4''
(5.5mm) (100mm)
1/4" 4''
(6.4mm) (100mm)
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.
16

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool. The use of any other attachment or accessory can be
dangerous and could cause injury or mechanical damage.
Code No. Bit Dia.
5/16"
939875
(8mm)
3/8"
939879
(10mm)
15/32"
939882
(12mm)
1/2"
939884
(13mm)
Overall Code No.
Length
4"
931852
(100mm)
4-3/4"
931854
(120mm)
4-3/4"
971704
(120mm)
6-5/16"
931855
(160mm)
Bit Dia. Overall
Length
9/16" 6-5/16"
(14.3mm) (160mm)
5/8" 6-5/16"
(16mm) (160mm)
3/4" 6-5/8"
(20mm) (170mm)
Code No.
931776
931670
959615