10-1-2. Reassembly
Reassembly can generally be carried out as the reverse of the disassembly procedure, with some items to be
noted as follows.
(1) Reassembly of the power supply unit
Perform wiring according to the wiring diagram (Fig. 5). Pay attention to the connecting direction of the
internal wires and the terminals.
Internal wire (red)
Internal wire (black)
[50] <50>
(2) Reassembly of the clutch mechanism
(a) Mount the Stopper Spring [10] <10> (2 pcs.), Stopper [9] <9> (2 pcs.), Thrust Washer [8] <8> and Spring
[7] <7> to the Front Case [11] <11> in order (see Fig. 6).
NOTE: Be careful not to drop the Stopper [9] <9> and the Stopper Spring [10] <10> until the Nut [6]
<6> is inserted.
Internal wire (brown)
Fig. 5
[7] <7> [8] <8>
[9] <9>
Fig. 6
--- 20 ---
Internal wire (blue)
[49] <49>
[10] <10>
[11] <11>
[33] <33>
[44] <44>
[46] <47>
[52] <52>
[51] <51>
[48] <48>