Table of Contents
Advertisement
PICTURE menu
COLOR TEMPERATURE
You can adjust the white balance of the projected image.
Less
bluish
Setting range: -6 to +6
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and
the lens iris on/off.
ON:
OFF:
WAVEFORM MONITOR
You can monitor whether or not the luminance level of
the input signal is in the recommended range by
displaying it in the waveform monitor. If the waveform is
not in the range, adjust it for the best quality. See
"Adjusting the signal condition with a waveform" on
page 24.
OFF
FULL SCAN(Y)
FULL SCAN(R)
FULL SCAN(G)
FULL SCAN(B)
SINGLE LINE SCAN(Y)
SINGLE LINE SCAN(R)
SINGLE LINE SCAN(G)
SINGLE LINE SCAN(B)
MONITOR POSITION
AUTO ADJUST
1. Press F G to move to the required waveform
style.
2. Press ENTER to select.
The WAVEFORM MONITOR will be displayed.
See "Adjusting the signal condition with a waveform"
on page 24.
MONITOR POSITION
When the FULL SCAN is selected, press F G I
H to adjust the position of the monitor.
See "Adjusting the signal condition with a waveform"
on page 24.
E
32 -
NGLISH
More
bluish
Automatic adjustment
No adjustment
UPPER LEFT
AUTO ADJUST
You can switch on/off the automatic adjustment
system in each items.
Items
BLACK LEVEL ADJUST
WHITE LEVEL ADJUST
RGB ADJUST (BLACK)
RGB ADJUST (WHITE)
1. Press F G and select the required item.
2. Press I H and switch on/off.
3. Press F G and select AUTO and press ENTER.
The confirmation screen will be displayed.
4. Press I H and select OK.
5. Press ENTER.
NOTE:
• When the WAVEFORM MONITOR is set to OFF, the
AUTO ADJUST is not displayed.
SPLIT ADJUST
You can perform image adjustment in some PICTURE
menu items while displaying a certain area of the frozen
image in a split window.
SPLIT ADJUST MODE
Select the required split style from NORMAL and
REVERSE in the SPLIT ADJUST MODE menu.
NORMAL
REVERSE
Default setting
ON
ON
OFF
OFF
Hide quick links:
Advertisement
Table of Contents
