Epson EMP 9000 - SXGA LCD Projector Owner's Manual page 63

This table summarizes the functions on the remote control.
Button
Freeze
A/V Mute
E-Zoom
Power
Effect buttons
Enter
Illumination
button
Esc
Menu
42
Function
Keeps the current computer or video image on the
screen.
Turns off/on the audio/video output of the projector. To
turn on the audio/video output, press either the A/V
mute button again or Esc button.
Executes the E-zoom function. When you press the
right of the button, it enlarges the image. When you
press the left of the button, it reduces the image.
To display a portion of the enlarged image which is
outside of the display area, press the Pointer button to
scroll the image.
Turns the projector on or off.
Use to display special effects that have been assigned
in the Effect menu or with the optional ELP Link IV
software.
Use the Enter button to navigate the menus or use the
remote as a mouse pointer when the projector is
connected to the computer with the main cable and the
mouse cable.
You can also selects a menu option by pressing the
center of this button(Enter).
If you press the Enter when a menu or help is
displayed, you can access to the next menu layer.
When the image source is a computer, the Enter
button acts as the mouse left click.
Lights up all buttons on the remote control.
The lights remain for 10 seconds.
Terminates the current function that you have been
executing .
If you press the Esc button when a menu or help is
displayed, you can go back to the previous menu
layer.
When the image source is a computer, the Esc button
acts as the mouse right click.
Displays or hides the menu.