About This Manual - Epson EMP 9000 - SXGA LCD Projector Owner's Manual

About This Manual

Chapter 1, "Installation", gives step-by-step instructions on
how to set up the projector and connect it to your computer,
video source, or other external speaker or PA system. Read
the installation procedures that apply to your configuration.
Chapter 2, "Using the Projector", describes how to switch
the projector on/off and control simple projector settings
using the remote control or the operation panel.
Chapter 3, "Using the Menus", describes how to use the
menus to adjust the color and image settings, change the
display of the projected image, and modify audio settings such
as bass and treble.
Chapter 4, "Using the ELP Link IV Software", describes how
to use the ELP Link IV software which supports the
presentation functions to control the projector and configure
special effects.
Chapter 5, "Maintenance", describes how to clean your
projector and perform limited maintenance.
Chapter 6, "Troubleshooting", describes how to interpret
your projector's indicator lights and gives helpful information
for avoiding errors, optimizing image quality and solving
problems.
Chapter 7, "Technical Specifications," lists the technical
specifications for your projector.
A Glossary and Index are provided at the end of the manual.
About This Manual xi