Manual Feed Slot - Brother HL-730 User Manual

English: HL-YL User's Guide, Chapter 2
USER'S GUIDE

MANUAL FEED SLOT

2–8
The multi-purpose sheet feeder also has a manual feed slot. You can
manually load paper sheet by sheet from this slot. You do not need to
remove paper from the multi-purpose sheet feeder when using the
manual feed slot.
When you load one sheet of paper manually:
You do not need to choose manual feed in the Setup dialog box of
your printer driver. Holding the selected size of paper in the selected
orientation (Portrait or Landscape), place the side of the paper you
wish to print on face down into the manual feed slot. Align the paper
at the center of the manual feed slot, and be sure to insert it all the
way. ( ) Move the paper guide of the manual feed slot to the paper
width you are using. (
Fig. 2-7 Moving the Paper Guide
When you load more than one sheet of paper manually:
Open the Setup dialog box of the supplied Windows printer driver
and choose Manual Feed in the Paper Source section. Follow the
above instructions to load the first page. The printer automatically
starts printing. After the first page is printed, the dialog box appears
and prompts you to load the next page. Load a sheet and choose OK
to resume printing. Repeat these steps until you have finished
printing all the pages.
!
Caution
If bi-directional communication is not operational between the printer
and the computer, such as when the printer is shared on a network, the
dialog box will not appear to load the next page. Manual paper feeding
is not recommended when your printer is attached to a network.
)