Connecting The Base (Radio Base) - Xerox 3100MFPX - Phaser B/W Laser Instructions Manual

Y
OUR TELEPHONE

Connecting the base (radio base)

Before making any connections, please refer to the safety instructions presented at
the beginning of this user guide.
To install your USB-DECT antenna, follow the steps below:
1. Connect the USB-DECT antenna (radio base), supplied in the pack, to the USB port
located at the rear of your multifunction terminal.
The antenna can also be connected to the USB port located on the front panel of the
multifunction terminal.
2. Once the base and the multifunction terminal are connected, activate the FAX-TEL
option on your multifunction terminal by successively pressing the
keys on the panel.
8