Advanced Options - Lexmark 6500e Fax Manual

Advanced Options

Touching this button lets you change Delayed Send, Advanced Imaging, Custom Job, Transmission Log, Edge Erase and ADF Skew
Fix settings.
• Delayed Send—This lets you send a fax at a later time or date. After setting up your fax, touch Delayed Send, enter the time
and date you would like to send your fax, and then touch Done. This setting can be especially useful in sending information
to fax lines that are not readily available during certain hours, or when transmission times are cheaper.
Note: If the printer is turned off when the delayed fax is scheduled to be sent, the fax is sent the next time the printer is
turned on.
•
Advanced Imaging—This lets you adjust the Background Removal, Contrast, Color Balance, Negative Image, Mirror Image,
Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you fax the document.
• Custom Job (Job Build)—This lets you combine multiple scanning jobs into a single job.
•
Transmission Log—This lets you print the transmission log or transmission error log.
•
Edge Erase—This lets you eliminate smudges or information around the edges of a document. You can choose to eliminate
an equal area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area
selected, leaving nothing on that portion of the scan.
•
ADF Skew Fix—This lets you correct slight skew in the scanned image.
Fax guide
Page 4 of 4