Dram Timing Configuration - Biostar TA75M Bios Setup Manual

TA75M UEFI BIOS Manual
DDR Memory Over Voltage
This item allows you to select DDR Memory Voltage Control.
APU DDR-PHY/PCI-E Over Voltage
This item allows you to select APU DDR-PHY/PCI-E Voltage Control.
FCH Over Voltage
This item allows you to select FCH Voltage Control.

DRAM Timing Configuration

MCT Timing Mode
This item allows you to select the DRAM Frequency programming method. If Auto,
the DRAM speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specified value. If Manual, the DRAM speed specified will be programmed
regardless of SPD.
Options: Auto (Default) / Limit / Manual
Memclock Value
This item allows you to set the Memory Clock.
Options: DDR-800 (Default) / DDR-1066 / DDR-1333 / DDR-1600 / DDR-1866
30